Solutions

We offer thorough repairs for the following types of common home damage:

  • Cracks and separations
  • Tilt/lean
  • Sags
  • Bulges

*Foundation repair will be done prior to any other repairs

Learn More

“Upgrades” are easy repairs done through accessible areas of the home. Upgrades are:

  • Proactive Preparation
  • Preventative
  • Limited Scope
  • Strengthen Vulnerable Features

Connections are made with metal brackets to improve the structural integrity.

Learn More

Comprehensive to encompass reinforcing, integrating, connecting and bracing:

  • Roof to wall
  • Foundations to wall
  • Floor(s) to wall
  • Attic, trusses, chimney, etc.

Best coordinated with a major remodel for optimal safety.

Learn More

Do you have questions about our services? Check out our frequently asked questions page for additional information!

Need a Free Consultation?

Fill out the form below and we will call you within an hour!

    Your name*

    Masonry is the most used material in the historical buildings of the European architectural heritage. The mechanical properties of these structures are often low, due to both the texture of the masonry and the poor quality of the mortar.

    Elena Ferretti and Giovanni PascaleSome of the Latest Active Strengthening Techniques for Masonry Buildings: A Critical Analysis

    Uniform Building Code (UBC): In 1927, the first edition of the UBC contained seismic provisions in its appendix for new construction, but it was not widely adopted. In the middle part of the 20th century, cities typically maintained unique seismic design requirements in local ordinances that were loosely similar to parts of the UBC and local variations in practice resulted in many inconsistencies. By the late 1970’s, most local governments were adopting various editions of the UBC with local amendments, but consistency in adoption dates and editions didn’t emerge until the 1980’s.

    Fred TurnerRevisiting Earthquake Lessons - Unreinforced Masonry Buildings

    There’s a roughly 50% chance that a magnitude 6 or larger earthquake will shake the Wasatch Front in the next half century. And many older structures would not withstand it.

    In order to prevent that from happening, contractors can tie the roof to the walls and strap down the chimney to prevent it from tipping, among other strategies. But that can be expensive, running homeowners $15,000 to $20,000.

    Bob CareyThe Utah Division of Emergency Management's earthquake program manager

    Unreinforced masonry (URMs) buildings and homes create the greatest risk for the Salt Lake Valley in the expected Utah earthquake. Salt Lake City’s Fix the Bricks facilitates seismic improvements for its residents URMs in an effort to save lives by reducing the number of deaths, injured and trapped after an earthquake. Preparedness starts at home. Act now!

    Salt Lake Fix the Brickshttps://www.slc.gov/em/fix-the-bricks/

    There are no guarantees of safety during earthquakes, but properly constructed and strengthened homes are far less likely to collapse or be damaged during earthquakes.

    Homeowner’s Guide to Earthquake SafetyPublished by the California Seismic Safety Commission 2020 edition

    Whatever the earthquake danger may be, it is a thing to be dealt with on the ground by skillful engineering, not avoided by flight…

    G. K. Gilbert, USGS ca. 1906

    scenario modeling of a major (magnitude [M] 7.0) earthquake on the Salt Lake City segment of the Wasatch fault zone predicts 2,000 to 2,500 fatalities, 7,400 to 9,300 life-threatening injuries, 55,400 buildings completely damaged, 21 million tons of debris, and $33.2 billion in estimated short-term, direct economic losses

    M. Leon Berrett, P.E.